MS852B User’s Manual
1.6 LED Indicator
￭ Scanner LED indicator
Description Indication
Trigger Pull
-8- © 2019 unitech Electronics Co., Ltd. All rights reserved.
No decode
N/A
Wake up
Decode Green Blink
Snapshot Blinking
Snapshot is complete N/A
Power on N/A
Transmission error N/A
Entry error Green Blink
Defaults set Green Blink
Number entry expected Green Blink
Battery charging Solid Red
Battery Low < 15% (battery
LED)
Red LED blinking every 2 seconds
Battery Low < 5% (battery
LED)
Red LED blinking fast with all other LED
indicators disabled
Red LED toggling every second for 5 seconds or
until trigger key pressed
System Warning /Error
BT is paired and disconnected
to the host
Green LED on
Scanner in Presentation Mode Green LED blinking every 2 seconds
System busy with data
scanning disabled
Green LED toggling every second
BT is connected to host &
ready to send data
Blue LED on
Good read Green LED flashing once
BT in pairing mode Blue LED toggling every second
unitech is a registered tr
ademark
of unitech Electronics Co., Lt
d.
To Next Page
Loading...
Need help?
General
