Unitech PA500 User Manual

Unitech Electronics Co., Ltd Created
by Yukiko
PA500 Operation
Manual
V2.0 Page 104 of 123
A4 Connect terminal to host
A4.1 Select service. Check “ActiveSync”. Tap “Finish”.
A4.2 To preserve battery power, be sure to end the Bluetooth ActiveSync
connection when synchronizing is complete. Tap “OK”.
A4.3 From /start/Program, double tap “ActiveSync.
A4.4 Tap “Menu” at bottom right corner. Select “Connect via Bluetooth”.
Terminal connect to host via Bluetooth ActiveSync.
9.2 Bluetooth Connection – Mobile Phone
Turn on the Bluetooth on your mobile phone.
B1. Search Mobile Phone
B1.1 From PA500, under “Settings” > “Connections”, double tap “Wireless
Manager”.
B1.2 Turn on Bluetooth.

Unitech PA500 Specifications

System Memory

SDRAM	64 MB
Flash ROM	64 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	yes

Laser Bar Code Scanner

scan rate	104 scans/sec ± 12 scans/sec
scan angle default	47°±3°
scan angle reduced	35°±3°

Power

main battery voltage	3.7 V
main battery capacity	2200 mAh
rechargeable time	3.5 hours

Operating Environment

operating temperature	32°F to 122°F (0°C to 50°C)
storage temperature	-4°F to 140°F (-20°C to 60°C)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight with battery and scan engine	Under 213 g
length	126 mm
height	23 mm