20 21
Operating instructions
Push button
Your hearing aids come with a push
button that allows you to further
adjust them.
Program control
If you have an active push button program
control, each time you push the button, you will
move to a new hearing aid program.
Program 1 (e.g. automatic program) 1 beep
Program 2 (e.g. speech in noise) 2 beeps
Program 3 (e.g. easy-t/telephone) 3 beeps
Program 4 (e.g. music) 4 beeps
Easy-t/telephone (see pg 25) short melody
DuoLink (if enabled) (see pg 23) Opposite ear beeps
the same as side
being adjusted
Your hearing aids beep to indicate which
program you are in.
Please see the front of this booklet for a listing
of your personalized programs.
Volume control
If your push button has been congured as a
volume control, either:
• Push the button on your right hearing aid to
increase the volume in both hearing aids
• Push the button on your le hearing aid to
decrease the volume in both hearing aids
or:
• Push the button to step through your volume
options
As you change the volume control, your hearing
aids will beep.
Volume setting Beeps
Suggested volume level 1 beep
Turning volume up short beep
Turning volume down short beep
Maximum volume level 2 beeps
Minimum volume level 2 beeps
To Next Page
Loading...
Need help?
General
