Page 2
MX-980 OWNERS MANUAL
Optional RF “No Rules” Operation
In combination with an MSC-400 Master System Controller, or an
RF Base Station, the MX-980 can control your system without being
in line-of-sight of the equipment.
The MSC-400 enhances the capabilities of the MX-980 by storing and
issuing Smart Macros to your main system components. It is triggered
by RF Smart Macro commands via RF (radio frequency). In addition,
your MX-980 can control components in secondary rooms and systems
via MRF-350 or MRF-260 RF base stations
3. The MSC-400 can control IR, RS232 and Relay controlled
devices.
2. The RFX-250 RF Sensor can be freely
positioned for optimal reception.
1. The MX-980 sends radio
waves in every direction, so
you don’t have to point the
remote anymore!
4. Self-adhesive “Flashers” affix to the
Infrared sensors on the front panels of
your components. Uniquely, all Complete
Control base stations can also connect to
components with rear panel IR Inputs via
adjustable IR Line Outputs. The MSC-400
offers RS-232 control via rear panel con-
nections as well.
To Next Page
Loading...
Need help?
General
