Universal Remote Control Universl Remote User Manual

STEP 4: Press the component button you want to set-up in the
MEDIA component button.
STEP 5: Point the GAMER at the component you want to program
and enter the 3-digit set-up code listed in the Code Tables. Once you
enter the correct code number, the component will turn off. If the
component does not turn off, enter the next code numbers listed
for your component until it turns off.
STEP 6: Now, turn on the component and test the the VOLUME
and CHANNEL buttons (for TV) or the PLAY and STOP buttons (for
VCR and DVD) to make sure that they all work. If any of the
functions do not work properly, repeat Step 5 using the next code
number listed for your component until you find a perfect match.
STEP 7: Once you’ve found a correct code, you must save
it. Press the MEDIA component button you just programmed one
more time to store the code number. The MEDIA component LED
light will blink three times to confirm that the code was
successfully stored.
24

Universal Remote Control Universl Remote Specifications

General

Brand	Universal Remote Control
Model	Universl Remote
Category	Universal Remote
Language	English