Universal Remote Control Universl Remote User Manual

MacroPower
TM
Imagine turning on all your components such as TV, DVD player
and surround sound receiver by pressing a single button on your
GAMER! What would normally take three remotes and three button
pushes, the GAMER can accomplish with the press of one button.
We call that MacroPower. Any of the POWER ON or the SYSTEM
OFF buttons can be programmed for MacroPower control. To set up
MacroPower to these buttons, follow these easy steps:
STEP 1: To program MacroPower commands for the Power ON
button, press the ON button and the MUTE button together and
hold them down for about 3 seconds until one of the component
button LED lights turns on.
STEP 2: Press the component button you want to turn on and
then the Power ON button and repeat for all other components in
the order you want them to turn on. The LED light will blink once
for each command.
21
IMPORTANT: If you don’t press a button within 20 seconds, the
LED light will turn off and exit the set-up mode and you will need
to start over.

Universal Remote Control Universl Remote Specifications

General

Brand	Universal Remote Control
Model	Universl Remote
Category	Universal Remote
Language	English