Page 1
MRF-350 BASE STATION
Introduction
The MRF-350 base station is an “addressable” base station like the MRF-300.
RF Addressing gives you the ability to control as many as 90 identical compo-
nents throughout a house. However, the MRF-350 is equipped with the
Narrow Band RF reception, so is only compatible with MSC System remotes.
4. Self-adhesive “Flashers” affix to the
Infrared sensors on the front panels of your
client’s components. The Flashers relay
commands to components out of sight of
the MRF-350’s Front Blaster. The flashers
plug in to the MRF-350’s rear flasher line
outputs via their 10 foot cables. Uniquely, the
MRF-350 can also connect to rear panel IR
Inputs via its adjustable IR Line Outputs.
3.The MRF-350’s built-in Front Blaster sends commands to
components in the same cabinet space as the MRF-350.
1. MSC System remote controls send
radio waves in every direction, so
your client enjoys “No More Pointing”
operation!
2.The RFX-250 RF Sensor can be freely positioned out of way of
the interference the A/V components create, connecting to the
MRF-350 via a 10’ cable (which can be extended).
NOTE: The RFX-250 is ONLY compatible with MSC System remotes: the current
versions of the MX-3000, MX-950, MX-900 and the TX-1000 remote controls.The
RFX-250 is NOT compatible with MX-3000 remote controls manufactured before
April 1, 2005.
You can identify the build date of an MX-3000 by looking at the serial number.The
first 6 digits indicate the build date. If the serial number appears as 122905
014054, the first 6 digits indicate that the remote was built on December 29, 2005.
To Next Page
Loading...
Need help?
General
