EasyManuals Logo
Home>URBANGLIDE>Bicycle>M1

URBANGLIDE M1 User Manual

URBANGLIDE M1
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
16
Troubleshooting
Problem
Possible cause
Solution
It does not work
The battery is not charged.
Charge the battery, check if the red
light is on.
Connections or cables are
disconnected.
Check that the battery is firmly seated
in the product
It does not work
continuously
The battery needs to be charged.
Charge the battery, check if the red
light is on.
The battery is not fully charged.
Make sure the power cable is well
connected.
The battery may need to be replaced.
It suddenly stopped
working
Overload, cut-off
Overloading may result in product
failure. Turn off the product, wait 15
seconds, then turn it on again.
Fuse burnt
Prior to this, check the condition of all
cables and connectors.
It is moving slowly
The brakes are not properly adjusted.
Check the condition of the brakes and
try to loosen. If this does not work,
please contact the after-sales service.
It has overloaded
Check that the user weighs less than
the previously recommended weight.
Check that there are no objects
obstructing the proper operation of the
product.
Bad driving condition.
Make sure you are on flat, dry, and
constant ground.
The tires / wheels are damaged.
Check the condition of the wheels of
the product.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the URBANGLIDE M1 and is the answer not in the manual?

URBANGLIDE M1 Specifications

General IconGeneral
BrandURBANGLIDE
ModelM1
CategoryBicycle
LanguageEnglish

Related product manuals