USR-CANET200-User-Manual Technical Support: h.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
Power LED will light after powering the module successfully
Work LED will blink if module works normally. And Work LED will off
or light when module works abnormally.
Dual colour. When module transmits data, CAN1 LED will blink in red;
when module receives data, CAN1 LED will blink in blue.
Dual colour. When module transmits data, CAN2 LED will blink in
red; when module receives data, CAN2 LED will blink in blue.
Dual colour. When module transmits data, RS485 LED will blink in
red; when module receives data, RS485 LED will blink in blue.
Figure 2 LED
1.2.2.Dimension
Figure 3 Dimension
To Next Page
Loading...
Need help?
General
