Operation Panel
4-52
6 Press [OK]. The font size is set and the Font menu reappears.
Character Pitch
You can set the character pitch for fixed fonts.
1 In the Print Settings menu, press or to select Font.
2 Press [OK]. The Font menu screen appears.
3 Press or to select Pitch.
4 Press [OK]. The Pitch entry screen appears.
5 Use the numeric keys or press or to enter the character pitch.
6 Press [OK]. The character pitch is set and the Font menu reappears.
Code Set (Setting the code set)
You can change the character code set. Available character code sets vary depending on the current font.
1 In the Print Settings menu, press or to select Code Set.
2 Press [OK]. The Code Set screen appears listing the available
character code sets.
3 Press or to select the desired character code set.
4 Press [OK]. The character code set is set and the Print Settings
menu reappears.
Font:
Courier
Exit
03
Font ID
02
01
Font Type
Pitch:
10.00
(0.44 99.99)
cpi
Note The character pitch can be set between 0.44 and
99.99 characters per inch, in 0.01 character-per-inch
increments.
Code Set:
IBM PC-8
IBM PC-8(D/N)
*
IBM PC-850
To Next Page
Loading...
Need help?
General
