Operation Panel
4-58
CR Action (Carriage-Return)
This procedure instructs the printer what to do when it receives a carriage return code (0DH).
• CR Only: A carriage-return is performed.
• LF and CR: A linefeed and carriage return are performed.
• Ignore CR: The carriage-return is ignored.
1 In the Page Setting menu, press or to select CR Action.
2 Press [OK]. The CR Action screen appears.
3 Press or to select the desired action.
4 Press [OK]. The action is set and the Page Setting menu
reappears.
Wide A4 (Wide A4 pitch)
Turn this to On to increase the maximum number of characters that can be printed in a line for an A4 page (78 characters
at 10 pitches) and Letter size page (80 characters at 10 pitches). This setting is only effective in PCL 6 emulation.
1 In the Page Setting menu, press or to select Wide A4.
2 Press [OK]. The Wide A4 screen appears.
3 Press or to select whether Wide A4 mode is enabled.
4 Press [OK]. The wide mode setting is set and the Page Setting
menu reappears.
XPS FitTo Page (Adjusting the XPS file print out size)
Select On in this setting to enlarge or reduce XPS files to fit the printable area during printing.
1 In the Page Setting menu, press or to select XPS FitTo
Page.
2 Press [OK]. The XPS FitTo Page screen appears.
3 Press or to select whether XPS FitTo Page mode is enabled.
4 Press [OK]. The XPS FitTo Page setting is set and the Page
Setting menu reappears.
TIFF/JPEG Size (Adjusting the TIFF/JPEG file print out size)
Use this setting to select the printing method used when TIFF or JPEG files are printed directly.
1 In the Page Setting menu, press or to select TIFF/JPEG
Size.
CR Action:
CR Only
01
LF and CR
02
*
Ignore CR
03
XPS FitTo Page:
Off
01
On
02
*
To Next Page
Loading...
Need help?
General
