4-99
Operation Panel
Ready (Preparation completed tone setting)
When On is selected in this setting, a tone sounds when print preparation has been completed.
1 In the Buzzer menu screen, press or to select Ready.
2 Press [OK]. The Ready screen appears.
3 Press or to select whether the preparation completed tone is
enabled.
4 Press [OK]. The preparation completed tone setting is set and the
Buzzer menu reappears.
Error (Error tone setting)
When On is selected in this setting, a tone sounds when a problem such as running out of paper or a paper jam occurs
during printing.
1 In the Buzzer menu screen, press or to select Error.
2 Press [OK]. The Error screen appears.
3 Press or to select whether the warning tone is enabled.
4 Press [OK]. The warning tone setting is set and the Buzzer menu
reappears.
Keyboard Confirm (Keyboard confirmation tone setting)
When On is selected in this setting, a tone sounds each time a USB keyboard is used.
1 In the Buzzer menu screen, press or to select Keyboard
Confirm.
2 Press [OK]. The Keyboard Confirm screen appears.
3 Press or to select whether the keyboard confirmation tone is
enabled.
4 Press [OK]. The Keyboard Confirm tone setting is set and the
Buzzer menu reappears.
Keyboard Confirm:
Off
01
On
02
*
To Next Page
Loading...
Need help?
General
