Operation Panel
4-104
2 Press [OK]. The DuplexPaperError screen appears.
3 Press or to select the setting for handling duplex paper errors.
4 Press [OK]. The handling of duplex paper errors is set and the Error
Handling menu screen reappears.
Paper Mismatch (Detection settings for paper size/type errors when the paper source is
fixed)
Select Continue in this setting if you want to continue printing even if the paper size or type you specified is different from
the fixed paper source, or select Display Error to have the paper feed error displayed.
1 In the Error Handling menu, press or to select Paper
Mismatch.
2 Press [OK]. The Paper Mismatch screen appears.
3 Press or to select the setting for handling paper mismatch
errors.
4 Press [OK]. The handling of paper mismatch errors is set and the
Error Handling menu screen reappears.
InsertMismatch (Action when size error occurs during paper feeding)
If the paper size you specified is different from the size of the paper that is fed when printing using a fixed paper source, you
can select Continue to continue printing, or Display Error to have the paper feed error displayed.
1 In the Error Handling menu, press or to select
InsertMismatch.
2 Press [OK]. The InsertMismatch screen appears.
3 Press or to select the setting for handling Insert Mismatch
errors.
4 Press [OK]. The handling of Insert Mismatch errors is set and the
Error Handling menu screen reappears.
MP Tray Empty (Warning when the MP tray is empty)
Turn this setting to On if you want the error displayed when the MP tray is configured as the default paper source, and there
is no paper in the MP tray, or turn it to Off not to have the error displayed.
The setting On enables the paper-empty message to display when the MP tray is empty.
1 In the Error Handling menu, press or to select MP Tray
Empty.
DuplexPaperError:
1-sided
01
Display Error
02
*
Paper Mismatch:
Continue
01
Display Error
02
*
InsertMismatch:
Continue
01
Display Error
02
*
To Next Page
Loading...
Need help?
General
