Utax P-5531DN User Manual

Preparation before Use
2-6
23 Use the numeric keys or  or  to set the subnet mask.
You can set any value between 000 and 255.
The method for entering is the same as for the IP Address.
24 Press [OK]. The subnet mask setting is stored and the IPv4
Setting menu reappears.
Entering the Default Gateway
When DHCP is set to Off, enter the Default Gateway manually.
25 Press  or  to select Default Gateway.
26 Press [OK]. The Default Gateway screen appears.
27 Use the numeric keys or press  or  to set the default gateway.
You can set any value between 000 and 255.
The method for entering is the same as for the IP Address.
28 Press [OK]. The default gateway is stored and the IPv4 Setting
menu reappears.
This completes the network settings. Press [Menu] and end the
mode selection menu.
IPv4 Setting:
Subnet Mask
Exit
04
Default Gateway
05
Bonjour
06
Default Gateway:
0. 0. 0. 0
Note When the network settings have been changed, restart
the network card of the device. This is mandatory to make
the settings effective. For details, refer to Restart Network
(Restarting the network card) on page 4-81.

Utax P-5531DN Specifications

General

Brand	Utax
Model	P-5531DN
Category	Printer
Language	English