Using the Operation Panel
4-54
4 Select On or Off using or .
5 Press [OK].
6 Press [MENU]. The display returns to Ready.
FTP (Server) (FTP (Server) setting)
Select whether or not to receive documents using FTP.
1 Press while >Protocol Detail > is displayed.
2 Press or repeatedly until >>FTP(Server) appears.
3 Press [OK]. A blinking question mark (?) appears.
4 Select On or Off using or .
5 Press [OK].
6 Press [MENU]. The display returns to Ready.
SNMP (SNMP setting)
Select whether or not to communicate using SNMP.
1 Press while >Protocol Detail > is displayed.
2 Press or repeatedly until >>SNMP appears.
3 Press [OK]. A blinking question mark (?) appears.
4 Select On or Off using or .
5 Press [OK].
6 Press [MENU]. The display returns to Ready.
SMTP (SMTP setting)
Select whether or not to send email using SMTP.
1 Press while >Protocol Detail > is displayed.
2 Press or repeatedly until >>SMTP appears.
3 Press [OK]. A blinking question mark (?) appears.
4 Select On or Off using or .
5 Press [OK].
6 Press [MENU]. The display returns to Ready.
POP3 (POP3 setting)
Select whether or not to receive email using POP3.
1 Press while >Protocol Detail > is displayed.
2 Press or repeatedly until >>POP3 appears.