EasyManuals Logo
Home>Utax>Printer>P-C2160DN

Utax P-C2160DN User Manual

Utax P-C2160DN
226 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #188 background imageLoading...
Page #188 background image
Troubleshooting
6-2
General Guidelines
The table below provides basic solutions for problems you may encounter
with the printer. We suggest you consult this table to troubleshoot the
problems before calling for service.
Tips
Printer problems may be solved easily by following the tips below. When
you have encountered a problem that following the above guidelines will
not solve, try the following:
Turn the printer power off and wait for several seconds. Then, turn on
the printer.
Reboot the computer which sends the print jobs to the printer.
Make sure that the procedures for printing are correctly followed in the
application software. Consult the documentation supplied with the
application software.
Symptom Check Items Corrective Action
Print quality is not good. Refer to Print Quality Problems on page 6-3.
Paper is jammed. Refer to Clearing Paper Jams on page 6-11.
Nothing lights on the operation panel
even when power is turned on and the
fan makes no noise.
Check that the power cord is properly
plugged into the power outlet.
Turn off the printer’s power, plug in the
power cord securely, and try turning on
the printer’s power again.
Push the power switch securely.
The printer prints a status page, but
does not print jobs from the computer.
Check the printer cable or the interface
cable.
Connect both ends of the printer cable
securely. Try replacing the printer cable
or the interface cable.
Check program files and application
software.
Try printing another file or using
another print command. If the problem
occurs only with a specific file or
application, check the printer driver
settings for that application.
The printer is emitting steam in the
area around the top tray.
Check the room temperature to see if it
is low, or if damp paper was used.
Depending on the printing environment
and the paper's condition, the heat
generated during printing will cause the
moisture in the paper to evaporate, and
the steam emitted may look like
smoke. This is not a problem, and you
can continue printing.
If the steam concerns you, raise the
room temperature, or replace the
paper with a newer, dryer paper.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Utax P-C2160DN and is the answer not in the manual?

Utax P-C2160DN Specifications

General IconGeneral
ColorYes
Print technologyLaser
Maximum resolution9600 x 600 DPI
Time to first page (black, normal)10.5 s
Time to first page (color, normal)12 s
Print speed (black, normal quality, A4/US Letter)21 ppm
Maximum duty cycle- pages per month
Number of print cartridges-
Paper input typeCassette
Total input capacity250 sheets
Multi-Purpose tray input capacity50 sheets
Paper tray media typesCut sheet
Paper tray media weight60 - 163 g/m²
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 220 g/m²
Wi-FiNo
Standard interfacesUSB 2.0
Memory slots1
Internal memory512 MB
Processor model465S
Processor familyPowerPC
Processor frequency677 MHz
Compatible memory cardsSD
Maximum internal memory1536 MB
Sound power level (standby)43 dB
Sound pressure level (printing)61.7 dB
CertificationGS/TÜV, CE
Product colorGrey, White
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)1129 W
Power consumption (off)0.1 W
Power consumption (standby)57 W
Power consumption (printing)360 W
Power consumption (PowerSave)6 W
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth523 mm
Width390 mm
Height370 mm
Weight29300 g

Related product manuals