Utax P-C2160DN User Manual

6-9
Troubleshooting
Toner has run out in the toner container(s). Replace the toner container using a new
toner kit for the particular color. The printer does not operate when this message is
displayed.
For example, if Replace toner C,K is displayed, replace the cyan and the black
toner containers.
For more information, refer to Toner Container Replacement on page 5-2.
Clean inside the printer when replacing the toner container. For more information, refer
to Cleaning the Printer on page 5-8.
A SSD error has occurred. Look at the error code given in place of ## and refer to
Storage Error Codes on page 6-10. To ignore the SSD error, press [GO].
Replace the toner container using a new toner kit. Color of the toner container that
needs to be replaced is represented by C (Cyan), M (Magenta), Y (Yellow), and K
(Black).
For more information, refer to Toner Container Replacement on page 5-2.
The top tray has become full (approx. 250 pages). You must remove all printed pages
from the top tray. When the printer detects that the top tray is empty again, the printer
will continues printing into the top tray.
If the toner container was taken from a different machine of the same model while it
was displaying the Add toner. message, ignore the message and use the toner.
This message is displayed if the installed toner container's regional specification does
not match the printer's.
Install the specified toner container.
An error has occurred in the USB memory device. To return the printer to the print-
ready status, press [GO].
When the cassette does not contain any paper that matches the print data (paper size
and type), this message allows you to specify an alternative cassette to use instead. A
paper source number is only displayed when an optional paper feeder is installed. To
print from a different paper source, refer to Paper Feed Mode (Setting the paper feed
source) on page 4-39.
Displayed when an attempt is made to register an account in the Job Accounting menu
by entering an account code that already exists.
For more information, refer to Job Accounting (Job Accounting selection/setting) on
page 4-88.
The administrator ID entered to open the Security function or Job Accounting menu is
not correct. Enter the correct administrator ID.
For more information, refer to Administrator (Administrator settings) on page 4-95.
The password does not match the password set. Enter the correct password. For more
information, refer to Administrator (Administrator settings) on page 4-95.
Message Corrective Action
Replace toner
C,M,Y,K
SSD error ##
Press GO
Toner low
C,M,Y,K
Top tray paper full
Unknown toner
installed
Unknown toner PC
C,M,Y,K
USB memory error ##
Press GO
Use alternative?
Cassette 1
Wrong Account
Wrong ID
Wrong Password

Utax P-C2160DN Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	9600 x 600 DPI
Time to first page (black, normal)	10.5 s
Time to first page (color, normal)	12 s
Print speed (black, normal quality, A4/US Letter)	21 ppm
Maximum duty cycle	- pages per month
Number of print cartridges	-
Paper input type	Cassette
Total input capacity	250 sheets
Multi-Purpose tray input capacity	50 sheets
Paper tray media types	Cut sheet
Paper tray media weight	60 - 163 g/m²
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Wi-Fi	No
Standard interfaces	USB 2.0
Memory slots	1
Internal memory	512 MB
Processor model	465S
Processor family	PowerPC
Processor frequency	677 MHz
Compatible memory cards	SD
Maximum internal memory	1536 MB
Sound power level (standby)	43 dB
Sound pressure level (printing)	61.7 dB
Certification	GS/TÜV, CE
Product color	Grey, White
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1129 W
Power consumption (off)	0.1 W
Power consumption (standby)	57 W
Power consumption (printing)	360 W
Power consumption (PowerSave)	6 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	523 mm
Width	390 mm
Height	370 mm
Weight	29300 g