6
Lowes.com
ASSEMBLY INSTRUCTIONS – NEW CONSTRUCTION ONLY
BEFORE INSTALLATION
Turn off power source. Review all safety precautions.
1. If spacing between joists is 12 in. apart, use 4 long wood
screws (AA) to attach the fan body (A) to the ceiling joists.
NOTE: Suspension brackets are not needed.
1
AA
A
Hardware Used
AA
Long wood screw
x 4
2. For joist spacing 16 in. - 24 in., insert suspension bracket I
(C) into the bracket cover on the duct connector side.
Then, attach suspension bracket II (D) and suspension
bracket III (E) to the back of the fan body (A).
2
C
E
D
A
3. Secure the fan body (A) to joist with suspension brackets
(D, E) using long wood screws (AA).
3
AA
AA
A
D
E
Hardware Used
AA
Long wood screw
x 6
4. Secure the suspension brackets (D, E) to fan body (A)
using short machine screw (BB).
4
BB
A
D
E
Hardware Used
BB
Short machine screw
x 1
To Next Page
Loading...
Need help?
General