EasyManuals Logo
Home>Utilitech>Heater>CZ225ERLSCN

Utilitech CZ225ERLSCN User Manual

Utilitech CZ225ERLSCN
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
10-3/5"
MINIMUM
DISTANCE
TO WALL
MINIMUM
DISTANCE
FROM
DISCHARGE
TO ANY
OBJECT
MINIMUM DISTANCE
TO FLOOR = 8ft
NOTE: Minimum clearance
to ceiling when not using
mounting brackets is 1-5/8"
MAXIMUM MOUNTING HEIGHT FOR:
Vertical air delivery unit = 11ft
Horizontal air delevery unit = 8ft
MOUNTING
LOCATION
MINIMUM
DISTANCE
TO WALL
FRONT VIEW
14"
12-1/2"
13"
24"
7-3/8"
4-1/2"
1-3/4"
1/2" or 3/4"
4-1/2"
SIDE VIEW
WARNING:
Extreme caution is necessary when any heater is
used by or near children or invalids and whenever the
heater is left operating and unattended.
Do not operate any heater after it malfunctions.
Disconnect power at service panel and have heater
inspected by a reputable electrician before reusing
Do not insert or allow foreign objects to enter any
ventilation or exhaust opening as this may cause an
electric shock or re or damage the heater.
To prevent a possible re, do not block air intakes or
exhaust in any manner.
Use this heater only as described in this manual. Any
other use not recommended by the manufacturer may
cause re, electric shock, or injury to persons.
The Mounting structure and the anchoring hardware
must be capable of reliably supporting the weight of
the heater and, if used, the mounting bracket.
All electrical power must be disconnected and the
main service box must be locked before inspection,
cleaning or servicing the heater. This is a precaution to
prevent serious shock.
This heater is designed to be directly wired to 240-volt
electric power. Never use with an extension cord or
relocatable power tap (outlet/power strip).
WARNING:
This heater is not suitable for use in hazardous
locations as dened by the national re protection
association (NFPA) in the United States. This heater
has hot and arcing (sparking) parts inside. Do not use
in areas where gasoline, paint, or ammable liquids
are used or stored.
This heater is not suitable for use in corrosive
atmosphere such as marine, greenhouses or chemical
storage areas.
This heater is hot when in use. To avoid burns, do
not let bare skin touch hot surfaces. If provided, use
handles when moving this heater. Keep combustible
materials, such as furniture, pillows, bedding, papers,
clothes, and curtains at least 3 feet (0.9 m) from
the front of the heater and keep them away from the
sides and rear.
This heater is not intended for use in bathrooms,
laundry areas and similar indoor locations. Never
locate heater where it may fall into a bathtub or other
water container.
Do not install closer than 8 inches to a vertical surface.
Do not install less than 8 feet from the oor.
SAFETY INFORMATION
SAVE THESE INSTRUCTIONS
HEATER LOCATION:
Install heater out of trafc areas maintaining
clearances stated in Figure 1. The direction
of air ow should not be restricted (i.e.: by
columns or machinery) and the air ow should
wipe exposed walls, rather than blowing directly
at them. When more than one heater is used in
an area, the heaters should be arranged so that
the air discharge of each heater supports the
air ow of the others to provide best circulation
of warm air, as indicated in Figure 2.
Figure 1
Figure 2
INSTALLATION INSTRUCTIONS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Utilitech CZ225ERLSCN and is the answer not in the manual?

Utilitech CZ225ERLSCN Specifications

General IconGeneral
BrandUtilitech
ModelCZ225ERLSCN
CategoryHeater
LanguageEnglish

Related product manuals