Utilitech HV-18S180 User Manual

BB
CC
AA
B
ASSEMBLY INSTRUCTIONS
5
HARDWARE USED
BB
CC
Screw x 2
2xrehsaWdevruC
AA
2xrenethgiTtuNcitsalP
2
1
1. TO USE AS A FLOOR FAN
The fan comes fully assembled.
No further assembly is required.
2. TO INSTALL AS A WALL FAN
Feed the screws (BB) through the curved washers
(CC) and the two holes on the fan stand (B) to
secure the fan to the wall.
WARNING
Mount fan on a wooden wall only.
To reduce the risk of electric shock and personal
injury, ensure the location for mounting is
able to support this fan.
Total weight of fan is 15 lbs.
It is recommended a qualified electrician mount
this fan.
TO ADJUST AIRFLOW UP AND DOWN
Tilt the fan to the desired angle.
Tighten the plastic nut tightener (AA) on
both tilt nuts to secure fan head (Fig. 2)．
TO ADJUST AIRFLOW UP AND DOWN
Tilt the fan to the desired angle.
Tighten the plastic nut tightener (AA) on
both tilt nuts to secure fan head (Fig. 1).
AA

Utilitech HV-18S180 Specifications

General

Brand	Utilitech
Model	HV-18S180
Category	Fan
Language	English