Uwatec MK25 EVO T User Manual

19
ENG - English
⚠
WARNING
Do not use silicone grease for the lubrication of Nitrox regulators.
⚠
WARNING
Second stage regulators, pressure gauges, consoles and other accessories used
in combination with Nitrox rst stage regulators must also be compatible with the
use of Nitrox mixes.
10. TROUBLESHOOTING
MALFUNCTION PROBABLE CAUSE SOLUTION
After opening the cylinder valve
the pressure gauge shows zero.
1. Empty cylinder.
2. Malfunctioning pressure gauge.
3. Malfunctioning cylinder valve.
Fill the cylinder.
Have the pressure gauge replaced by a
SCUBAPRO authorized technician.
Have the cylinder valve checked by a
SCUBAPRO authorized technician.
HP or IP leak. Damaged O-rings. Have the O-rings replaced by a
SCUBAPRO authorized technician.
Avoid over-tightening the connections.
Valve leak. Defective valve or stem. Have the valve checked by a
SCUBAPRO authorized technician.
No air supply. Malfunctioning regulator
(rst or second stage).
Have the regulator checked by a
SCUBAPRO authorized technician.
The regulator free ows. Venturi effect has been triggered. Cover the mouthpiece with a nger or
direct the mouthpiece opening down
submerging it.
If the free ows continues. Malfunctioning regulator. Do not begin the dive (or if already in
the dive, end it) and have the regulator
checked by a SCUBAPRO authorized
technician.
Water leak
inside the regulator second stage.
Dirt or malfunctioning exhaust valve or
damage to mouthpiece or diaphragm.
Have the regulator checked by a
SCUBAPRO authorized technician.

Uwatec MK25 EVO T Specifications

General

Brand	Uwatec
Model	MK25 EVO T
Category	Diving Instrument
Language	English