Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600
vc@valcontrols.com • www.valcontrols.com
The Prevent open at high pressure function is activated and Pressure input is
over the limit
This error can be caused by:
• High pressure
It can be solved by:
• Lower the pressure
• Increase the pressure limit
• Disable the function
The Prevent open at high pressure function is activated and Pressure input is
over the limit
This error can be caused by:
• High pressure
It can be solved by:
• Lower the pressure
• Increase the pressure limit
• Disable the function
There is a problem with the SD card
This error can be caused by:
• SD card not inserted
• SD card not properly inserted in socket
• Faulty SD card
It can be solved by:
• Insert a SD card
• Remove the SD card and insert it again