Val Controls I 24-AF Series User Manual

DID-UM-002
Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600
vc@valcontrols.com • www.valcontrols.com
Revision: 10
71/74
No. 43
Reference SOT start
Description
A reference SOT was started.
No. 44
Reference SOT finished
Description
A reference SOT finished
No. 45
SOT aborted by operator
Description
A SOT was aborted by the operator
No. 46
Reference SOT aborted by operator
Description
A reference SOT was aborted by the operator
No. 51
Operational
Description
The IDC was set in operational mode
No. 52
Fail position remote
Description
The IDC was set in fail position mode
No. 57
Set in local mode
Description
The IDC was set in local mode
No. 58
Set in remote mode
Description
The IDC was set in remote mode
No. 61
Auto calibration was started
Description
An auto calibration was started
No. 62
Auto calibration finished
Description
An auto calibration finished
No. 63
Auto calibration aborted
Description
An auto calibration was aborted

Val Controls I 24-AF Series Specifications

General

Brand	Val Controls
Model	I 24-AF Series
Category	Controller
Language	English