Valor 546LFB ZC Portrait Ledgeview Front User Manual

4005278-01
PORTRAIT
Ledgeview Fronts 546LFB ZC
Installation and Owner’s Manual
©2016, Miles Industries Ltd.
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
Notes: This kit must be installed
or serviced by a qualifi ed installer,
service agency or gas supplier.
These instructions are to be used
in conjunction with the main
installation instructions for the
above listed heater models.
INSTALLER
Leave this manual
with the appliance.
CONSUMER
Retain this manual for
future reference.
Heat
exchanger
cover
Hardieboard Panel
Stud brackets (2)
ZC Bae
Stand o brackets
Backing Plate
Backing frame
Assembly
530 Engine
(sold separately)
Ledgeview Front with Barrier screen
Insulation
Overview (530 engine sold separately)
The 546LFB ZC Portrait Ledgeview Front
is designed to be used on the 530 Valor
heaters when installed in a zero clearance
application.
For installation with an insert, use 546LFB
Ledgeview Fronts.
Approved for use with Valor heater models 530 only in ZC applications;
NOT compatible with 530INI/IPI insert engines

Valor 546LFB ZC Portrait Ledgeview Front Specifications

General

Brand	Valor
Model	546LFB ZC Portrait Ledgeview Front
Category	Fireplace Accessories
Language	English