WARNING: To reduce the risk of personal injury, unplug your multifunction cleaner before
performing maintenance/troubleshooting checks.
I
s there an accessory missing?
•
Check the parts overview page to make sure the
a
ttachment is supplied with your unit.
•
If it is missing, please call our vax careline to order
a
replacement: 0844 412 8455 or visit vax.co.uk to
order online.
Why won’t my multifunction cleaner put down
water/solution mix?
• Check there is water/solution mix in the clean
water tank.
• Ensure the solution tube on the underside of the
motor housing has been released and is in the
clean water tank.
• Check that the pump button on the carry handle
has been switched on.
• Ensure the foot pedal on the floor head is
positioned to the back of the floor head.
• Ensure the collar on the wash tool is pushed
forward.
Why won’t my multifunction cleaner recover
water?
• The dirty water tank may be full.
• The floor head/wash tool nozzle might have an
obstruction.
W
hat do I do if an accessory/the unit has
b
ecome damaged or broken?
• Visit vax.co.uk for parts and spares.
•
Please call our careline to purchase new spares or
o
rder a replacement: 0844 412 8455.
Why wont the multifunction cleaner pick up in
dry mode?
• A filter may be clogged; refer to maintenance
section for cleaning instructions.
• The dust bag may be incorrectly fitted, check
assembling your machine in dry mode.
• The dust bag may be full, check and replace with a
new dust bag.
• Check for blockages in the
hose/floor heads/accessories.
Why is dust escaping from my multifunction
cleaner in dry mode?
• The filters may be incorrectly installed, check that
they are fitted correctly.
• The dust bag may be incorrectly fitted, check
assembling your machine in dry mode.
To Next Page
Loading...
Need help?
General
