Vax Dual Power W86-DP-B Quick Manual

Using your machine Taking care of your machine
Remove dirty water tank To empty the tank, unplug
the quick spout pour cap
and empty.
Insert dirty water tank
back into the cleaner
Always switch o and unplug the
carpet washer from the electrical
outlet before assembling, lling
and emptying the clean water
tank, emptying the dirty water
tank, or before connecting /
disconnecting the attachments.
WARNING
IMPORTANT: All solution must be emptied from tanks when storing the machine
NOTE: Rinse out tank with clean water and leave to air dry before storing your machine
Emptying the dirty water tank
Turn the machine on. Recline the machine. Press trigger to
release solution.
For best results apply
solution on the forward
stroke and release the
trigger to recover solution
on the backward stroke.
40C
Max
Fill clean water tank with
solution mix.
Tighten cap before
returning tank to unit.
Unwrap power cord and
plug unit in.
Mix solution with
warm water.
(40°C Max)
Operating your carpet washer
TIP
Carpets should be dry
vacuumed thoroughly
before washing.
For large spills use the carpet washer
Turn the machine on. Recline the machine. For best results use
straight parallel strokes.

Vax Dual Power W86-DP-B Specifications

General

Brand	Vax
Model	Dual Power W86-DP-B
Category	Vacuum Cleaner
Language	English