7
support.vax.co.uk
GETTING STARTED
ASSEMBLY
Push the handle into the main body
until it clicks into place.
IMPORTANT:
• Test the machine over a small hidden area of your flooring before use. If no damage occurs continue
cleaning.
• When using the machine, basic safety precautions should always be observed. Take care not to
oversaturate flooring. Always finish on a dry stroke (no trigger pressed).
• For heavily soiled areas, it may be necessary to repeat the cleaning process.
• Only use VAX ONEPWR Multi-floor solution. Using other solutions may cause excess foaming and
will invalidate your guarantee.
• The water/solution tank should only be filled with warm water (max 40⁰C). Filling the water/
solution tank with hot/boiling water will damage your washer and invalidate the guarantee.
• Empty and rinse out water/solution tank and dirty water tank and leave to air dry before storage.
Do not leave solution stored in the tanks between uses.
• For prolonged storage the brushroll should be removed, cleaned and stored in the rinse/storage tray.
Pull to open the battery cover.
Close the battery cover.
Holding the cover open, slide the battery
into the machine until it clicks into place.
To remove the battery press both the
buttons to release.
To Next Page
Loading...
Need help?
General
