Vax POWER 7 User Manual

vax.co.uk
7
Maintenance (Keep your Vax as good as new)
Clearing blockages
WARNING: To reduce the risk of electric shock, the power cord must be disconnected
before performing maintenance/troubleshooting checks. Turn the vacuum cleaner
off and unplug from the electrical socket.
!
Hose blockages
The flexible hose may be disconnected
from the vacuum cleaner. Carefully remove
any blockages found and reconnect the
hose securely.
Switch the vacuum cleaner off and disconnect the power
plug from the electrical outlet.
Lay the Turbobrush on a flat surface and turn over to expose
the brushbar. Using a pair of scissors, cut through any
threads or hairs caught around the brushes and brushbar.
Accessory blockages
Remove accessory from the hose/telescopic
tube. Carefully remove the blockage and return
to the cleaner.
Removing blockages from the TurboTool (some models only)
Locking ring
Tabs
Turn the TurboTool over and
slide off the locking ring.
Removing blockages from the Turbobrush (some models only)
Detach lower housing and
remove blockage.
To re-assemble the TurboTool,
ensure that the tabs are
engaged and pivot the lower
housing closed. Slip the
locking ring over the neck of
the TurboTool and into the
groove to finish.
C89-P7 Power 7 User Guide v1.2.qxd:User guide 28/6/11 11:48 Page 7
All manuals and user guides at all-guides.com

Vax POWER 7 Specifications

General

Suction power	400 AW
Variable power	Yes
Maximum input power	2400 W
Annual energy consumption	- kWh
HEPA class	HEPA 12
Proper use	Home
Noise level	- dB
Cleaning surfaces	Carpet, Hard floor
Vacuum air filtering	HEPA
Dirt separating method	Filtering
Type	Cylinder vacuum
Cordless	No
Cleaning type	Dry
Dust capacity	4 L
Product color	Grey, Silver, Violet
Tube material	Plastic
Dust container type	Bagless
Cord length	8 m

Weight and Dimensions

Weight	- g