Vax POWERMAX VRS18W User Manual

vax.co.uk
6
preparing the machine
5. Preparing the Machine
Hold the handle of the clean water tank and press ‘PULL
TO RELEASE’. Tilt Clean Water Tank away from the carpet
washer and remove (Fig 5/1).
Unscrew the measuring cap from the reverse side of the
clean water tank. Fill measuring cap with solution (Use
only 1 capful of solution per full tank). Pour into clean
water tank (Fig 5/2).
Fill remainder of clean water tank with warm (max 40°C)
tap water. Replace cap (Fig 5/3).
Place bottom of clean water tank into carpet washer and
push back until it locks into place (Fig 5/4).
Fig.5/3
Fig.5/4
Fig.5/1
Fig.5/2
VRS18W Updated UG 06.07.14_V1.0 04/07/2014 15:30 Page 6

Vax POWERMAX VRS18W Specifications

General

AC input voltage	220 - 240 V
AC input frequency	50 Hz
Maximum input power	500 W
Annual energy consumption	- kWh
Cord length	5.9 m
Dust capacity	- L
Product color	Black, Red
Tube material	Metal
Dust container type	Bagless
Noise level	- dB
Machine type	Step-on
Cleaning type	Wet
Cleaning surfaces	Carpet, Hard floor
Maximum area covered	- m²
Vacuum air filtering	-
Maximum area performance	- m²/h
Dirty water tank capacity	1.7 L
Fresh water tank capacity	2.1 L
On/off switch	Yes

Weight and Dimensions

Weight	5600 g