7
operation
When the dirty water reaches the max fill line on the dirty
water tank, empty the tank.
Hose Attachments
NOTE: DO NOT OVERSATURATE YOUR UPHOLSTERY.
For best results use steady, moderate, forward and
backward motion.
Make sure upholstery is dry before use.
Put cleaner in its upright position. Remove tools from
storage caddy. Assemble as shown. Connect the
upholstery attachment to the trigger adapter (Fig.4/7).
Remove the tank door from the top of the dirty water
tank (Fig.4/8).
Insert the hose adapter into the top of the dirty water
tank (Fig.4/9).
Connect the hose water supply plug into the socket on the
lower left side of the cleaner (Fig.4/10).
Using the Wash Tool
Turn power switch on and brush switch off. While
depressing the solution spray trigger, push attachment in
forward motion (Fig.4/11).
Release trigger and pull attachment backwards over the
same path to remove dirty water and solution from
upholstery. (For heavily soiled areas, repeat if necessary).
Storing the Wash Tool
Place hose and wash tool into their storing locations. Store
for next use.
Fig.4/6
Fig.4/7
Fig.4/8
Fig.4/9
Fig.4/10
Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308
Fig.4/11
V-026 Series User Guide.qxd:V-026 26/3/10 15:45 Page 7
To Next Page
Loading...
Need help?
General
