EasyManuals Logo
Home>Vector>Remote Starter>JUMP-START SYSTEM

Vector JUMP-START SYSTEM User Manual

Vector JUMP-START SYSTEM
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
2 YEAR LIMITED WARRANTY PROGRAM
This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of Vector
Manufacturing, Ltd., regarding this product. There is no other warranty, other than those described herein.
This Vector Manufacturing, Ltd. product is warranted, to the original purchaser only, to be free of defects in materials and work-
manship for two years from the date of purchase without additional charge. The warranty does not extend to subsequent pur-
chasers or users. Vector Manufacturing, Ltd. will not be responsible for any amount of damage in excess of the retail purchase
price of the product under any circumstances. Incidental and consequential damages are specifically excluded from coverage
under this warranty.
This product is not intended for commercial use. This warranty does not apply to accessories or damage to units from misuse or
incorrect installation. Misuse includes wiring or connecting to improper polarity power sources.
RETURN/REPAIR POLICY: Defective products, other than accessories, may be returned postage prepaid to Vector Manufacturing.
Any defective product, other than accessories, that is returned to Vector Manufacturing within
30 days of the date of purchase will be replaced free of charge. If such a product is returned more than 30 days but less than
two years from the purchase date, Vector Manufacturing will repair the unit or, at its option, replace it free of charge.
If the unit is repaired, new or reconditioned replacement parts may be used, at Vector Manufacturing’s option.
A unit may be replaced with a new or reconditioned unit of the same or comparable design. The repaired or replaced unit will
then be warranted under the terms of the remainder of the warranty period. The customer is responsible for the shipping charges
on all returned items after 30 days. During the warranty period, Vector Manufacturing, Ltd. will be responsible for the return ship-
ping charges.
LIMITATIONS: This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting from normal wear and tear
(including chips, scratches, abrasions, discoloration or fading due to usage or exposure to sunlight),
accidents, damage during shipping to our service facility, alterations, unauthorized use or repair, neglect, misuse, abuse, failure
to follow instructions for care and maintenance, fire, flood and Acts of God.
If your problem is not covered by this warranty, call our Technical Support Department at (954) 584-4446 or Toll Free at (866)
584-5504 for general repair information and charges if applicable. You may also contact us through our website at www.vec-
tormfg.com.
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations on how long
an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the exclusions or limitations
stated herein may not apply. This warranty gives the purchaser specific legal rights; other rights, which vary from state to state, may
apply.
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Vector Manufacturing Technical Support by telephone,
fax or mail. We suggest that you keep the original packaging in case you need to ship the unit. When returning a product, include
your name, address, phone number, dated sales receipt (or copy) and a description of the reason for return and product serial
number. After repairing or replacing the unit, we will make every effort to return it to you within four weeks.
WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector Manufacturing. Enter
VEC012APM as Model and
JUMP-START SYSTEM
as Product Type. All Vector Manufacturing, Ltd. products must be regis-
tered within 10 days of purchase to activate this warranty. Mail the completed registration form, along with a copy of the origi-
nal sales receipt to:
ATTN.: CUSTOMER SERVICE / VECTOR MANUFACTURING, Ltd.
4140 SW 28th Way, Ft. Lauderdale, FL 33312
PH: 954-584-4446 • TOLL FREE: 866-584-5504 • Fax: 954-584-5556.
You may also contact us at our web site www.vectormfg.com.
WARRANTY IS NON-TRANSFERABLE AND NON-REFUNDABLE.
REV101603

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vector JUMP-START SYSTEM and is the answer not in the manual?

Vector JUMP-START SYSTEM Specifications

Power IconPower
peak ampere1200 Amps
boost ampere450 Amps
instantaneous cranking amps450 Amps
Battery IconBattery
battery type12Volt, 19AH/20HR Sealed, Rechargeable Non-Spillable, Maintenance-free
dc charging adapter12 Volt DC
ac charging adapter110/120 Volt AC (700mA, 12 Volt DC Output)
Cables and Clamps IconCables and Clamps
jumper cablesHeavy Duty, Welding Cable
cables clamps450 Amp, Heavy Duty Clamps
reverse polarity detection2.5 Volts (min)
Weight and Dimensions IconWeight and Dimensions
height12.75 in (32.39 cm)
width11 in (27.94 cm)
depth5.5 in (13.97 cm)
weight16 lbs (7.26 Kg)

Related product manuals