FIGURE 1 – FRONT PANEL
FIGURE 2 – BACK PANEL
5
1
3
2
1
3
4
2
5
1) THREE NORTH AMERICAN STANDARD OUTLETS
2) GREEN LED SHOWS UNIT IS OPERATING
3) RED LED SHOWS UNIT IS SHUT DOWN
4) ON/OFF SWITCH
4
1.2 MAXX SST SAFETY FEATURES
BUILT-IN AUTOMATIC SAFETY FEATURES INCLUDE:
•Overload and over-temperature shutdown activated if AC output
exceeds rated watts
• AC short-circuit shutdown and automatic reset
• Low voltage audible alarm and reset
(sounds at 10.6 volts input)
• Low-voltage shutdown and automatic reset
(activates at 10.0VDC)
• High-input voltage shutdown (activates at above
15.5VDC) and automatic reset
WARNING: MAXX SST™ output should be treated with the same caution
as any 110/120VAC circuit. It is very important that installers and users read
and follow all instructions provided in this manual to ensure optimum safety
and performance.
1) HIGH SPEED COOLING FANS 3) RED POSITIVE (+) TERMINAL AND RETAINING NUT
2) BLACK NEGATIVE (–) TERMINAL AND 4) TERMINAL COVER
RETAINING NUT 5) CHASSIS GROUND CONNECTOR
To Next Page
Loading...
Need help?
General
