Appendix A: Site Survey for Wireless Probes Key Information
A-2
METHOD
Take all details and measurements necessary to complete the site survey.
The form has to be completed in the same format by all surveyors. This is so that when or orders are placed with
the local distributor the administrator will understand clearly the information on the survey, and will be able to
compile an accurate parts list.
Note: The local installer will be responsible for the labor element and any locally supplied parts, the survey should
provide enough information for them to be able to do this successfully.
Key Information
SURVEYORS DETAILS
• Name of surveyor
•Company
• Date of survey
• Name/address/telephone number of installation company
GENERAL SITE DETAILS
• Site name and address (include country and local postcode)
• Telephone number (s)
• Site contact name
• Oil company (or group company name)
TAN K I N F OR MATI ON
• Number of tanks to be monitored
• No of any tanks not to be monitored
• State available probe entry size for each tank
• Check that there are no internal obstructions to the probe
• Determine the tank diameter (height) and probe length required
• Identify any tank lid that has no entry and advise action required
• Note product type of each tank
• Note SWC’s for each tank
• Note max tank capacity of each tank if available (e.g. dipstick top mark or dipchart)
• State whether the tank is single tank, and indicate the end shape if known
• State if the tank is siphon or line manifolded
• Indicate the number of lids on the tank
• Indicate if the tank has a STP fitted
• State whether the tank is single or double wall
• State the material the tank is made of
To Next Page
Loading...
Need help?
General
