Need help?Do you have a question about the Vega VEGABAR 66 and is the answer not in the manual?
General| Protection | IP66/IP68 |
|---|---|
| Output signal | 4 ... 20 mA/HART |
| Accuracy | ±0.1 % |
| Process connection | G 1/2, 1/2" NPT |
| Temperature range | -40 ... 100 °C / -40 ... 212 °F |
| Ambient temperature | -40 ... +80 °C |
| Materials, wetted parts | Stainless steel |
Specifies requirements for personnel performing operations on the VEGABAR 66 instrument.
Details the intended application of the VEGABAR 66 pressure transmitter.
Outlines essential safety regulations and guidelines for operating the VEGABAR 66.
Directs users to specific safety information for operating the VEGABAR 66 in hazardous (Ex) areas.
Offers general guidelines for installing the VEGABAR 66, considering process conditions and mounting position.
Provides step-by-step instructions for mounting the VEGABAR 66 using a straining clamp.
Details the procedure for mounting the VEGABAR 66 via a screwed connection into a vessel.
Explains the mounting process for the VEGABAR 66 using a lock fitting mechanism.
Describes how to mount the VEGABAR 66 with its housing and thread into a vessel or basin.
Guides on mounting the VEGABAR 66 when using an external housing, including wall mounting.
Covers essential safety instructions and preparations for connecting the VEGABAR 66 to its power supply.
Provides a step-by-step guide for connecting the VEGABAR 66, focusing on single/double chamber housings.
Provides the wiring diagram for the VEGABAR 66 in a double chamber housing, Ex d version.
Details the elements and key functions of the PLICSCOM module for adjusting the VEGABAR 66.
Guides users through the step-by-step configuration process for VEGABAR 66, including level and pressure measurements.
Helps identify common causes of faults and outlines initial steps for troubleshooting the VEGABAR 66.
To Next Page
