12 - ENGLISH
1. DESCRIPTION.
Surface-mounted electronic thermostat to control ambient temper-
ature (heating and air-conditioning), exchange relay output 5(2) A
250 V~, powered by two AAA batteries LR03 1.5 V (not included).
2. SCOPE.
The thermostat is suitable for ambient temperature control by regu-
lating the supply circuit of the burner or heat pump (heating), or the
supply circuit of the air conditioner (air conditioning).
3. INSTALLATION.
The thermostat must be mounted on surface at a height of 1,5
m above floor level, in an appropriate position for measuring the
ambient temperature; do not position the instrument inside niches,
behind doors and curtains, close to heat sources or in areas influ-
enced by outside weather conditions.
The base of the device has 2 slots placed 60 mm apart for fastening
directly to the wall with ø 6 mm screws and studs.
Use in dry, non-dusty environments at a temperature between 0
°C and +40 °C.
To Next Page
Loading...
Need help?
General
