© 2019 Vision Engraving & Routing Systems
Vision 1624R, 2525 and 2550
Series 5 Installation Guide
Revised: 7/2/2019Part number 12-1089-01
This is ONLY the Installation Guide.
PLEASE review the complete User
Manual for your machine, which will be
installed on your computer after the
software installation is completed.
Red Dot Laser Pointer Offset
X__________ Inches__ mm__
Y__________ Inches__ mm__
Braille Inserter Offset
X__________ Inches__ mm__
Y__________ Inches__ mm__
Factory Settings
To Next Page
Need help?
General
