Vision 1624R User Manual

Vision 1624R, 2525 and 2550 Series 5 Installation Guide22
© 2019 Vision Engraving & Routing Systems
2.5.2 High Frequency Router Head
Wiring Connections for Inverter (used with High Frequency Router Head only)
NOTE: The Auxiliary Power Cable is pre-wired on all 16 and 25 Series Routers.
Remove Inverter Cover and feed the Auxiliary Power Cable through hole in bottom of Inverter. Connect the
three black wires labeled, T1, T2 and T3, to their respective connection points. Connect the Green

Vision 1624R Specifications

General

Brand	Vision
Model	1624R
Category	Engraver
Language	English