Vision 1624R User Manual

Vision 1624R, 2525 and 2550 Series 5 Installation Guide32
© 2019 Vision Engraving & Routing Systems
3. Locate the High Speed Engraving Spindle on the Rail Plate with the Dowel Pins inserted into the
Dowel Pin Holes.
4. Install and tighten the 4 Mounting Screws.
5. Connect the Proximity Sensor Plug into the Proximity Sensor Port on the rear of the router Carriage.

Vision 1624R Specifications

General

Brand	Vision
Model	1624R
Category	Engraver
Language	English