Vision SP-1400P User Manual

5
SP-1400P_manual_en
3. CONNECT LOUDSPEAKERS TOGETHER Use the included speaker cable as shown on
previous page. If cable provided is not long enough use unshielded speaker cable with
gauge of 0.75mm or higher.
4. CONNECT INPUTS To the minijack and/or phono connectors on the rear panel.
5. CONNECT POWER Connect C7 (figure-8) power into rear of master loudspeaker.
Figure-8 (C7) Power Socket
Input connectors

Vision SP-1400P Specifications

General

Brand	Vision
Model	SP-1400P
Category	Speakers
Language	English