Vision SP-1400P User Manual

7
SP-1400P_manual_en
OPERATION
1. TURN ON/OFF Press the volume dial on the front of the master loudspeaker to bring out of
standby. To turn off press-and-hold the dial.
When turned on the product will resume the last input and volume level. When mains
power is activated the unit will come out of standby automatically.
2. SWITCH INPUTS Short-press the volume dial to change input.
3. TONE CONTROL The remote control can be used to adjust the tone control and all of the
other functions above.
Note: Vision use one remote for all products so some buttons will not work with this product.
Volume Dial
Long Push = on / off
Short push = input 1 / input 2
Slave Loudspeaker
Active Loudspeaker
(Contains amplifier)

Vision SP-1400P Specifications

General

Brand	Vision
Model	SP-1400P
Category	Speakers
Language	English