Vision SP-1800PBT User Manual

9
SP-1800PBT_manual_en.doc
STATUS INDICATORS
On the front panel is a row of status LEDs:
BLUE LED – Bluetooth input
Flashing slowly: Bluetooth is in pairing mode
On: Device paired
If devices unpaired it will turn off after 10 minutes.
YELLOW – line-level input
On: cable input selected
RED LED – Amplifier in standby
Flashing slowly: mute activated
Flashing quickly: IR from remote control being received
On: loudspeakers off
BLUETOOTH INPUT
DEFAULT PIN: 1111
When speakers are turned on or when Bluetooth selected, the Bluetooth radio will be in pairing
mode for 10 minutes. The Blue LED will flash while in pairing mode, then stay on when paired.
If “Bluetooth Priority” is on the speakers will automatically switch to the Bluetooth source when
a device is paired.
CHANGE BLUETOOTH DEVICE NAME AND PIN
1. DOWNLOAD AND INSTALL BLUESUITE SOFTWARE (WINDOWS ONLY) FROM
https://visionaudiovisual.com/techaudio/sp-1800p/
2. PAIR PHONE TO SPEAKERS
3. PRESS BUTTON ON REAR OF SPEAKERS Release when Blue LED on front turns off
4. CONNECT PC TO SPEAKERS WITH USB CABLE (NOT INCLUDED)

Vision SP-1800PBT Specifications

General

Brand	Vision
Model	SP-1800PBT
Category	Speakers
Language	English