Visonic POWERMAXEXPRESS Quick Reference Guide

Quick Reference Guide
Network APN User Name Password
O2 mobile.o2.co.uk Web Web
Vodafone pp.vodafone.co.uk Web Web
Orange orangewap Orange Multimedia
Orange orangeinternet User Pass
T Mobile general.t-mobile.uk User or wapuser Wap
L The APN’s above are provided by the network provider
for public use. Visonic is not responsible for network
availability at any time.
•
Press , when nished then press and
repeat for the user name.
•
Press , when nished then press and
repeat for the GPRS password.
•
Press HOME then and the display shows ‘3. C.S.
Reporting’ press .
•
At ‘Report Event’ press then press to select either
‘All * Backup’ or ‘All (-op/oc)*backup’ if open close signals
are not required. Press , toconrm.
•
Press until ‘Receiver 1 account’ is shown then press
.Enteryouaccountnumberherewithprexof‘00’for4
digit accounts. Press ,
.
•
Press and repeat for the second account number if
applicable.
•
Press until ‘IP RCVR’ is displayed, then press . Enter
the IP address of the central station using the table below
or by contacting the central station directly. Note that the IP
address must be entered in long format i.e. 81.3.124.1 should
be entered as 081.003.124.001. Press .
•
Press and repeat for ‘IP RCVR 2’ if applicable.
•
Press until ‘GPRS UL/DL’, press , , then
enter the SIM telephone number in to the ‘My SIM Tel.’ menu.
Press ,
.
GPRS setup is now complete.
Central
Station
Primary
IP Address
Secondary
IP Address
Engineers contact
phone no.
East Midlands
Central Station
(EMCS)
082.003.050.121 081.134.193.037 08448099980
G4S Contact 0871 246 0080 for information
Locked Up
Monitoring
081.142.093.090 081.142.93.91 01642236990
Northern
Monitoring
081.149.098.101 0844 871 2223
Southern
Monitoring
081.138.161.164 0844 871 2223
Visonic UK Test
Receiver
087.254.016.010
GSM Reporting to Central Station
•
Within the installer mode press untilyousee‘Dene
Comm’ then press .
•
Press until 2.GPRS/BB is shown then press
.
•
Press until ‘GSM report’ then press .
•
Press until ‘GSM report enable’ the ,
.
•
Press HOME then and the display shows ‘3. C.S.
Reporting’ press .
•
At ‘Report Event’ press then press to select either
‘All * Backup’ or ‘All (-op/oc)*backup’ if open close signals are
not required. Press , toconrm.
•
Press until ‘Receiver 1 account’ is shown then press
.
Enteryouraccountnumberherewithprexof‘00’for
4 digit accounts. Press ,
.
•
Press and repeat for the second account number if
applicable
•
Press until PSTN/GSM Receiver 1 then press .
Enter the full central station telephone number including any
prexforanoutsidelineandSTDcode.Press
,
.
•
Press and repeat for PSTN/GSM Receiver 2 if applicable.
•
GSM setup is now complete
Conguring Dual-path Reporting
PowerMaxExpresscanbeconguredasdualoreventriplepath
reporting to comply with insurance requirements. Initially you
willneedtocongureeachpath:-
•
GPRS / GSM – follow the instructions above to enable the
communications paths
•
PSTN (standard phone line) – ensure the account numbers and
PSTN receiver numbers are entered as per the instructions in
GSM reporting. You must also enable the PSTN line fault option
inDeneComm–3.CSReporting(seemanualformoredetails)
ReportingpathsareenabledintheDeneCommmenu.Once
there:-
•
Press until 3.CS Reporting then press .
•
Press until ‘1st Report Method’ press .
•
Press to select the rst reporting path i.e. PSTN or
Cellular (GSM/GPRS) press , .
•
Press and repeat for the second report method
•
Press and repeat for the third method if required.
When selecting Cellular the PowerMax will always choose GPRS
rstprovideditisconguredandavailable.
L For GPRS / GSM reporting you must ensure the SIM card is
congured for voice and data access
PowerMaxExpress can also communicate using broadband/
ADSL using a Powerlink module. Ask your distributor or a
Visonic representative for more details.

Visonic POWERMAXEXPRESS Specifications

General

Brand	Visonic
Model	POWERMAXEXPRESS
Category	Security System
Language	English