Void INFINITE QX 4 User Manual

Infinite X
Page 6
Reference Manual
Rear Panel
1.Input XLR's
The input impedance of the balanced XLR's is 20Kohms. Pin 2 is signal +
2.CH 1 - CH 2 Mode Switch
Selects stereo, parallel or bridge modes between CH 1 & 2.
See page 8 for more details.
3.CH 3 - CH 4 Mode Switch
Selects stereo, parallel or bridge modes between CH 3 & 4.
See page 8 for more details.
4.Bridge Mode Light
A blue LED will illuminate when 2 channels are operating in bridge mode.
Use input 1 when bridging CH 1 & CH 2 and output 1 (pins 1+, 2+)
Use input 3 when bridging CH 3 & CH 4 and output 3 (pins 1+, 2+)
See page 8 for more details.
5.Speakon Outputs
Output 1 is wired with CH 1 on pins 1+, 1- and CH 2 on pins 2+, 2-.
Output 3 is wired with CH 3 on pins 1+, 1- and CH 4 on pins 2+, 2-.
Outputs 2 and 4 are wired 1+, 1- only.
6.Channel Filter Switch
Selects between Hi Pass, Lo Pass or no filter (bypass) for each channel.
7.Filter Frequency Selector
Adjusts each channels filter frequency anywhere between 70Hz to 5kHz.
8.Power Input
32 Amp Powercon socket. 230 VAC 50Hz.
5
1
3
230V AC 50Hz
Inputs
Bridge
Input
CH 3CH 4 CH 2 CH 1
Outputs
CH 3CH 4 CH 2 CH 1
Bridge
Input
Stereo Bridge
Parallel
Stereo Bridge
Parallel
CH 4
XOVER
Lo Pass Hi Pass
Bypass
Lo Pass Hi Pass
Bypass
Lo Pass Hi Pass
Bypass
Lo Pass Hi Pass
Bypass
Serial No.
CH 3
XOVER
CH 4 - CH 3 CH 2 - CH 1
CH 2
XOVER
CH 1
XOVER
300Hz 2k
70Hz 5kHz
1k
100
Hz
3.5k
Out 1 : Pin 1+ : ch 1 +
Pin 1 - : ch 1 -
Pin 2+ : ch 2 +
Pin 2 - : ch 2 -
Out 3 : Pin 1+ : ch 3 +
Pin 1 - : ch 3 -
Pin 2+ : ch 4 +
Pin 2 - : ch 4 -
Out 1 : Pin 1+ : sig +
Pin 2+ : sig -
Out 3 : Pin 1+ : sig +
Pin 2+ : sig -
Bridge Mode
300Hz 2k
70Hz 5kHz
1k
100
Hz
3.5k
300Hz 2k
70Hz 5kHz
1k
100
Hz
3.5k
300Hz 2k
70Hz 5kHz
1k
100
Hz
3.5k
24 4 6666 77 8

Void INFINITE QX 4 Specifications

General

Brand	Void
Model	INFINITE QX 4
Category	Amplifier
Language	English