Volkswagen beetle 1972 User Manual

Chancing
a
wheel
It
you
have
a
flat
tire,
move
off
the
road-
way.
Turn
on
the
emergency
flasher.
In
addition,
mark
the
position
of
your
car
with
flares
or
other
warning
devices
to
alert
other
motorists.
Before you change a wheel, be sure the
ground is level and firm, especially near
the rear wheels where the Jack ports are.
Set the parking brake and block the
wheels opposite the defective wheel on
the other side of the car.
For a more efficient and safe changing
of a flat tire, observe the following 10
steps.
Further down, we expand on these steps
їп greater detail.
step 1— Take out tools, jack and spare
wheel
Step 2 – Remove hub cap.
Step 3—Loosen wheel bolts. Do not
take them ош.
Step 4— Securely insert the jack in jack
port. There is one for each
side. It is under the running
board toward the rear, and is
used for front or rear wheel
changing.
Never jack the car up by the bumper or
the running board
Step 5—Jack up car.
Step 6- Change wheel and hancligh-
ten wheel bolts.
Step 7- Lower car.
Step 8— Further tighten the whee! bolts.
Step 9-Replace hub cap.
Step 10— Important: Torque adjustment.

Volkswagen beetle 1972 Specifications

General

Brand	Volkswagen
Model	beetle 1972
Category	Automobile
Language	English