Overview of the control elements
Fig. 1 Overview of the control elements
Dif
ferent versions of the infotainment system are supplied. The labelling and functions of the infotainment
buttons ⇒ Fig. 1
2
and the position of the CD slot
5
may vary between versions.
Rotary/push knob:
– Press to switch on or of
f ⇒ page 7.
– Turn to adjust the basic volume on whichever source is in use ⇒ page 7.
Infotainment buttons: press a button to select a function.
–
RADIO
: switches to radio mode and changes frequency band in radio mode ⇒
page 12.
–
MEDIA
: switches to media mode ⇒
page 20.
–
CAR
: opens vehicle and system settings ⇒
Booklet Owner's manual, chapter Introduction to the in-
fotainment system.
–
SETUP
: opens menu and system settings ⇒
page 40.
–
SOUND
: opens sound and volume settings ⇒
page 40.
–
EJECT
: ejects the CD ⇒ page 20.
–
MUTE
: mute the audio source ⇒
page 8.
–
PHONE
: opens the telephone control system ⇒ page
30. The current audio source is muted if no
mobile telephone provision is installed.
Touchscreen ⇒ page 7.
Setting knob: the function of this button depends on the unit's operating state.
– In all radio modes: turn for manual station or channel selection. Press to start and stop the scan
function ⇒ page 12.
– In media mode: turn to open the track list. Press to start and stop the scan function ⇒ page 20.
– Turn to select menu options in long lists and press to access the selected option (e.g. select a sta-
tion from the station list).
CD slot: for inserting and removing CDs ⇒ page 20.
AUX-IN socket: for connecting an external audio source ⇒ page 20.
Memory card slot: the slot is located underneath or to the left of the screen, depending on the unit
version ⇒ page 20.
1
2
3
4
5
6
7
Composition Touch, Composition Colour6