www.volta.com.tr
12
www.volta.com.tr
12
P15: Engine Start-up Adjustment 0-100
P16: Riding Function: 0 o, 1 on
P17: Headlamp Synchronization 0 o, 1 on
P99: Press on down button for starting, 99 is demonstrated, after that, press
on up button for 5 seconds for a long time to start.
ODO Zero-Out: Press on down button for 5 seconds for a long time, ODO is
reset.
Key Explanations
1: Press ON/OFF button for a short time to open indicator when it is o. In
order to change interface in ODO / TRIP / RM / TM / ERRO mode when indi-
cator is open, press ON/OFF button for a short time
2: In order to turn o the indicator, press on ON/OFF button for a long peri-
od. In order to increase PAS level, press on up button + for a short period, in
order to decrease PAS level, press on down button + for a short period.
3: In order to adjust parameter, press on + button for a long period.
In order to change parameters on adjustment interface, press on ON/OFF
button for a short period and press on MODE button to add parameter (“A”
on left side) / minus (“d” on left side) After change, in order to pass to next
parameter and save it, press on ON/OFF button for a short period; press on
last parameter or MODE button for a long period; parameter stops flashing
and it is saved. In order to exit from parameter adjustment interface, press on
ON/OFF + MODE button for a long period or wait for 10 seconds and auto-
matically exit from mode.
Note:
The vehicle you purchased, can demonstrate dierence comparing to expla-
nations indicated in these instructions of use.
2. FUNCTIONS
To Next Page
Loading...
Need help?
General
