Fault handling
Despite regular maintenance according to the maintenance schedule and perfect operation conditions, faults that
need to be attended to during travel, may occur. This chapter describes some possible alarms and fault handling.
Note that the content of this chapter does not provide full coverage of the possible fault messages and alarms.
Contact a Volvo Penta workshop for assistance with diagnostic readouts and unresolved faults.
0
3
2
1
4
RPMX1000
SYSTEM INFORMATION
1
ON/Off START
ALARM/DIM STOP
2
P0016957
If an operational fault arises an audible alarm will
sound and a symbol will flash in the tachometer
window(1) If optional equipment such as an alarm
monitor or an EVC display are installed, the relevant
warning lamp will flash there also.
Cancel the alarm by depressing the multi-function
button (2). The audible alarm will be silenced. The
symbol will be lit continuously until the fault is
remedied.
This chapter describes faults and actions to be taken.
CAUTION!
Read the safety precautions for maintenance and
service in the Maintenance Safety Information
chapter before starting work.
47711262 01-2019 © AB VOLVO PENTA 41
To Next Page
Loading...
