EasyManuals Logo

Volvo Penta D2-55 User Manual

Volvo Penta D2-55
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
42
Electrical system
WARNING! Always stop the engine and break the current using the main switches before working on the
electrical system. Isolate shore current to the engine block heater, battery charger, or accessories mounted
on the engine.
Main switch
The main switch must never be turned off before the
engine has stopped. If the circuit between the genera-
tor and the battery is cut off when the engine is
running the generator can be seriously damaged. For
the same reason charging circuits must never be
switched over while the engine is running.
IMPORTANT! Never break the circuit with the
main switches while the engine is running.
Electrical connections
Also check that all electrical connections are dry and
free of oxidation and that there are no loose connec-
tions. If necessary, spray these connections with a
water-repellent spray (Volvo Penta Universal oil).
Fuses
The engine has a fuse holder with four 15 A fuses.
This is located on the relay box to the left of the
engine. One fuse protects the system and cuts power
in the event of an overload, the others are spares.
If a fuse blows the system can be reconnected by
moving the cable to the next fuse. Always investigate
the cause of an overload before resetting the fuse!
IMPORTANT! Make sure that you always have
spare fuses on board.
Maintenance: Electrical system
7742957 - Downloaded from www.volvopenta.com 22/09/2008 11:33:23

Other manuals for Volvo Penta D2-55

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Volvo Penta D2-55 and is the answer not in the manual?

Volvo Penta D2-55 Specifications

General IconGeneral
Engine TypeDiesel
Number of Cylinders4
Power Output55 hp
AspirationNaturally aspirated
Alternator115 A
Fuel SystemDirect injection
Bore x Stroke84 mm x 100 mm
Cooling SystemFreshwater cooling with heat exchanger
Width523 mm
Displacement2.2 l (134 cu in)

Related product manuals