EasyManuals Logo

Volvo Penta TAD1355GE User Manual

Volvo Penta TAD1355GE
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
Engine Fuel Filter Replacement
WARNING!
Fire hazard. When carrying out work on the fuel system
make sure the engine is cold. A fuel spill onto a hot
surface or an electrical component can cause a fire.
Store fuel soaked rags so that they cannot cause fire.
IMPORTANT:
Do not fill the new fuel filter with fuel before assembly.
There is a risk that contamination could get into the
system and cause malfunctions or damage.
1 Clean round the fuel filter.
2 Remove the filter with a suitable filter remover.
Collect any spilled fuel in a collection vessel.
3 Clean the filter mating surface on the filter bracket.
4 Lubricate the seal with diesel fuel and install the
new fuel filter. Tighten the fuel filter in accordance
with the instructions on the fuel filter.
5 If necessary, vent the fuel system, please refer to
Fuel system, bleeding, page 76.
Maintenance
74 47711296 01-2019 © AB VOLVO PENTA

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Volvo Penta TAD1355GE and is the answer not in the manual?

Volvo Penta TAD1355GE Specifications

General IconGeneral
BrandVolvo Penta
ModelTAD1355GE
CategoryEngine
LanguageEnglish

Related product manuals