Maintenance Schedule
Your Volvo Penta engine and its equipment are designed for high reliability and long life. It is built so as to have
minimal environmental impact. If given preventive maintenance, according to the maintenance schedule, and if
Volvo Penta original spares are used, these properties are retained and unnecessary malfunctions can be
avoided.
CAUTION!
Read the chapter on Maintenance before starting work. It contains instructions on how to carry out maintenance
and service operations in a safe and correct manner.
When both operation and calendar time are specified, perform the maintenance job at the interval which is reached
first.
Service program
FSI = First Service Inspection C = Clean
S = Special Service R = Replace
A - F = Type of service (regular service) L = Lubrication
I = Inspection (includes, if necessary, cleaning, adjust-
ment, lubrication and change)
FSI = First Service Inspection
After the first 100-200 Hours
Fuel pre-filter, draining condensed water I
Coolant Level I
Drive Belts I
Start and warm up engine
Inspection with VODIA (Diagnostic Tool) I
Coolant/oil/fuel, leakage I
Engine and transmission, abnormal noises I
Stop engine
Engine Oil and Oil Filters / By-pass filter R
Restart engine
Oil pressure / oil leakage I
S1
Every 50-600 Hours At least every (month)
12 24 48
Engine Oil and Oil Filters / By-pass filter R ●
S2
After the First 1000 Hours
Valve clearance A
7748681 12-2011 49
To Next Page
Loading...
Need help?
General
